LifeSource UA-789 User Manual download pdf (Page 17)





This monitor automatically stores up to sixty (60) blood pressure and

pulse measurements in memory. Measurements stored in memory are

assigned an index number in the order of the newest to the oldest.

To retrieve readings, follow these simple steps:

 When the display screen is showing only the

time, press and quickly release the Memory

("M") button. You will see the date (month

and day) and time of the most recent blood

pressure that was taken followed by the

measurement.

2. If you want to retrieve other measurements

in memory, press and release the Memory

button repeatedly until the desired date and

time of the measurement are reached. The

measurement will then be displayed.

3. The display will shut off automatically a few

seconds after the readings are displayed.

If there are no measurements stored in memory, you will see dashes

in the date and time fields followed by a measurement of three 0s

displayed vertically.

To clear the measurement history from memory, press and hold the

Memory button for at least five seconds while the display screen is

showing only the time. Release the Memory button when you see

the M symbol in upper left hand corner of the display flash and

disappears. This indicates that the memory has been cleared.

 Stored measurements, time, date, and alarm settings will be lost if batteries

become low or are removed for more than 30 seconds.

ABOUT MEMORY

MONTH

DAT E

TIME

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 26 27

No comments

LifeSource UA-789 User Manual Page 17